Installation guide

Switch Services
5-25
2. Select the Configuration tab.
3. Refer to the Access Group field to define ACL IDs. An ACL ID must be created before it is selectable
from a drop-down menu. To create an ACL ID, see ACL Configuration on page 6-19
.
4. Refer to the Other Settings field to define the following:
Full Access Supply a numeric ACL ID from the drop-down menu to provide the
ACL full access.
Only Control Queries Supply a numeric ACL ID from the drop-down menu to provide the
ACL only control query access to SNTP resources.
Server and Query
Access
Enter a numeric ACL ID from the drop-down menu to provide the
ACL Server and Query access to SNTP resources.
Only Server Access Provide a numeric ACL ID from the drop-down menu to provide the
ACL only server access to SNTP resources.
Authenticate Time
Sources
Select this checkbox to ensure credential authentication takes
place between the SNTP server and the switch. When this
checkbox is selected, the Apply and Revert buttons become
enabled to save or cancel settings.
Act As NTP Master
Clock
When this checkbox is selected, the Apply and Revert buttons
become enabled to save or cancel settings within the Other
Settings field.