Installation guide

Switch Services
5-7
• Infinite - If selected, the client can use the assigned address indefinitely.
• Actual Interval - Select this checkbox to manually define the interval for clients to use the DHCP
server assigned addresses. The default lease time is 1 day, with a minimum setting of 1 minute.
10. Within the Servers field, change the server type used with the pool and use the Insert and Remove
buttons to add and remove the IP addresses of the routers used.
11. Modify the Included Ranges (starting and ending IP addresses) for this particular pool.
Use the Insert and Remove buttons as required to define the range of supported IP addresses.
A network pool without any include range is as good as not having a pool at all, because it won't be
useful in assigning addresses.
12. Click OK to save and add the changes to the running configuration and close the dialog.
13. Refer to the Status field (at the bottom of the current screen).
The Status is the current state of the requests made from the applet. Requests are any “SET/GET”
operation from the applet. The Status field displays error messages if something goes wrong in the
transaction between the applet and the switch.
14. Click Cancel to close the dialog without committing updates to the running configuration.
5.2.1.2 Adding a New DHCP Pool
Add a new DHCP pool as needed to suit the address distribution requirements of your network.
To add a DHCP pool:
1. Select Services > DHCP Server from the main menu tree.