Installation guide

Network Setup
4-133
4.10.4.1 Editing a Port Instance Configuration
To edit and reconfigure Port Instance parameters.
1. Select a row from the port table and click the Edit button.
Most of the MST Port Instance parameters can be reconfigured, as indicated below.
Port Instance ID Read only indicator of the instance ID used as a basis for other
modifications.
Port Index Read only indicator of the port index used as a basis for other
modifications.
Port Priority If necessary, change the port priority value for the bridge. The lower
the priority, a greater likelihood of the bridge becoming a root.
Admin Internal Path
Cost
If necessary, change the value for the Admin Internal Root Cost of
a path associated with an interface.
A lower the path cost, the greater likelihood of the specific
interface becoming a root.
Operational Internal
Path Cost
Displays the Operational Internal Root Cost of a path associated
with an interface. A lower the path cost, the greater likelihood of
the specific interface becoming a root.