Installation guide

Network Setup
4-118
2. Click the Adopted AP tab.
3. Refer to the Adopted AP screen for the following information:
4. Click the Export button to export the contents of the table to a Comma Separated Values file (CSV).
MAC Address Displays the radio's first MAC address when it is adopted by the
switch.
Model Displays the model number of the access port.
Serial Displays the serial number of the access port, and is used for
switch management purposes. It is read-only and cannot be
modified.
HW Version Displays the hardware version of the access port. This information
can be helpful when troubleshooting problems with the access
port.
IP Address Displays the IP address of the adopted access port.
Bootloader Displays the software version the access port boots from. This
information can be helpful when troubleshooting problems.
Protocol Version Displays the version of the interface protocol between the access
port and the switch. This information can be helpful when
troubleshooting problems with the access port.
Fw Version Displays the access port firmware version at run time. Use this
information to assess whether the software requires an upgrade
for better compatibility with the switch.
Radio Indices Displays the indices of the radios belonging to the selected access
port. These indices are equivalent to a numerical device
recognition identifier (index) for the radio.