Installation guide

Network Setup
4-106
2. Select the Configuration tab.
3. Refer to the following information as displayed within the Configuration tab:
Type Displays whether the radio is an 802.11a radio or an 802.11 bg
model radio.
Placement Displays the default placement when an radio auto-adopts and
takes on default settings. Options include; Indoor or Outdoor. The
default is Indoor.
Channel Displays the default channel used when the radio auto-adopts and
takes on the default settings. This value can be a specific channel,
Random, or ACS. Random assigns each radio a random channel.
ACS (Automatic Channel Selection) allows the switch to
systematically assign the channel. The default is random.
Power dBm Displays the power settings when a radio auto-adopts default
settings. Defaults are 20 dBM for 802.11bg and 17 dBm for
802.11a.
Power mW Displays the default transmit power in mW (derived from the Power
dBm setting). Defaults are 100 mW for 802.11bg and 50 mW for
802.11a.