Installation guide

Network Setup
4-97
5. Refer to the Traffic field for the following information:
6. Refer to the RF Status field for the following information:
MAC Address Displays the Hardware or Media Access Control (MAC) address for
the access port. Access ports with dual radios have a unique
hardware address for each radio.
Num Associated MUs Displays the number of MUs currently associated with the radio.
AP Type Displays the access port model.
Radio Type Displays whether the access port radio is an 802.11a or 802.11bg
radio.
Current Channel Displays the channel the access port is currently passing traffic on.
If the channel is displayed in red, it means the configured channel
does not match the current channel. The configured channel in this
case, is the value in parentheses. The AP may not be operating on
the configured channel for 2 reasons: Uniform spreading is enabled
or radar was encountered on the configured channel.
Pkts per second Displays the average total packets per second that cross the
selected radio. The Rx column displays the average total packets
per second received on the selected radio. The Tx column displays
the average total packets per second sent on the selected radio.
The number in black represents this statistic for the last 30 seconds
and the number in blue represents this statistic for the last hour.
Throughput Displays the average throughput in Mbps on the selected radio.
The Rx column displays the average throughput in Mbps for
packets received on the selected radio. The Tx column displays the
average throughput for packets sent on the selected radio. The
number in black represents this statistic for the last 30 seconds and
the number in blue represents this statistic for the last hour.
Avg Bit Speed Displays the average bit speed in Mbps on the selected radio. This
includes all packets that are sent and received. The number in black
represents this statistic for the last 30 seconds and the number in
blue represents this statistic for the last hour.
Non-unicast Pkts Displays the percentage of the total packets for the selected radio
that are non-unicast packets. Non-unicast packets include
broadcast and multicast packets. The number in black represents
this statistic for the last 30 seconds and the number in blue
represents this statistic for the last hour.
Avg MU Signal Displays the average RF signal strength in dBm for all MUs
associated with the selected radio. The number in black represents
this statistic for the last 30 seconds and the number in blue
represents this statistic for the last hour.
Avg MU Noise Displays the average RF noise for all MUs associated with the
selected radio. The number in black represents this statistic for the
last 30 seconds and the number in blue represents this statistic for
the last hour.