Installation guide

Network Setup
4-85
2. Click the Configuration tab.
3. Refer to the table for the following information:
Index Displays the numerical index (device identifier) used with the
device radio. Use this index (along with the radio name) to
differentiate the radio from other device radios.
Description Displays a user assigned name for the radio.
AP Type Displays the type of access port detected. The switch supports
Motorola AP-300 model access ports.
Type Use the Type to identify whether the radio is 802.11a radio or an
802.11bg radio.
Adopted Displays the radio’s adoption status. If the radio is adopted, a green
check displays. If the radio is not adopted, a red X displays.
Parent AP MAC
Address
Displays the access port's Ethernet MAC (the device MAC address
that is printed on the casing of the unit). Please do not confuse this
BSSID MAC with the access port's Ethernet MAC address.
MAC Address The Base Radio MAC is the radio's first MAC address when it is
adopted by the Switch.
State Display the radio’s current operational mode. If the radio is set as
a Detector AP, the state is "Detector", otherwise the state is
"Normal".
VLAN Displays the name of the VLAN currently used with each access
port radio.