Installation guide

Network Setup
4-78
3. Select a MU from the table in the Status screen and click the Details button.
4. Refer to the following read-only MU’s transmit and receive statistics:.
MAC Address Displays the hardware or Media Access Control (MAC) address for
the MU.
IP Address Displays the unique IP address for the MU. Use this address as
necessary throughout the applet for filtering and device intrusion
recognition and approval.
Power Save Displays the current PSP state of the MU. This field has two
potential settings. PSP indicates if the MU is operating in PSP
mode. In PSP, the MU runs enough power to check for beacons, and
is otherwise inactive. CAM indicates the MU is continuously aware
of all radio traffic. CAM is recommended for MUs transmitting
frequently.
WLAN Displays of the WLAN the MU is currently associated with.
VLAN Displays the VLAN parameter for the name of the VLAN the MU is
currently mapped to.
Last Active Displays the time the MU last interoperated with the switch.
QoS Information Displays an indicator of the wireless device’s battery life.
Additionally, the service period for the selected MU is also
displayed.
Radio Index Displays is a numerical identifier used to associate a particular
Radio with a set of statistics. The Index is helpful for distinguishing
the a particular radio from other MU radios with similar
configurations.
Radio Type Displays the radio type used by the adopted MU. The switch
supports 802.11b MUs as well as 802.11 a/b and 802.11 a/g
dual-radio MUs. The radio also supports 802.11a only and
802.11g MUs.