Installation guide

Network Setup
4-67
• Conduct a NAC check for MU's connecting to the WLAN as well as perform an additional exclude
function, by attaching an exclude list to the WLAN.
• Not perform NAC validation for all MUs connecting to the WLAN.
• Include a few MU’s for NAC validation and bypass the rest of the MU’s.
To view the attributes of a NAC Inclusion list:
1. Select Network > Wireless LANs from the main menu tree.
2. Select the NAC Include List Configuration tab to view and configure NAC enabled devices.
3. The Include Lists field displays devices that can be included on a WLAN (a printer for example).
Use the Add button to add a device for configuration on a WLAN. A maximum of 6 MAC addressees
are allowed per device. For more information, see Adding an Include List to a WLAN on page 4-68.
The List Configuration field displays a list of MAC addresses available on a WLAN. You can add
more than one device in the list. For example, printer 1, printer 2 etc.
4. Select the Add button (within the List Configuration field) to add additional devices to the WLAN.
You can create up to 32 lists (both include and exclude combined together) with a maximum 64 MAC
entries per list. For more information, see Configuring Devices on the Include List on page 4-68.
5. The Configured WLANs field displays available WLANs. Associate a list item (within the Include
Lists field) with as many WLANs as required.
For information on mapping NAC Include list items with WLANs, see Mapping Include List Items to
WLANs on page 4-69.
6. To delete a device (and its configuration), select it from the Include Lists and click the Delete
button.
7. Use the Edit button in the List Configuration section to modify the devices parameters.
8. To delete any list configuration for a particular device, select the row from the List Configuration
section and click on the Delete button.