Installation guide

Network Setup
4-45
The Radius Configuration screen contains tabs for defining both the Radius and NAC server settings.
For a NAC overview, see Configuring NAC Server Support on page 4-47.
6. Refer to the Server field and define the following credentials for a primary and secondary Radius
server.
RADIUS Server
Address
Enter the IP address of the primary and secondary server acting as
the Radius user authentication data source.
RADIUS Port Enter the TCP/IP port number for the primary and secondary server
acting as the Radius user authentication data source.
The default port is 1812.
RADIUS Shared
Secret
Provide a shared secret (password) for user credential
authentication with the primary or secondary Radius server.
Server Timeout Enter a value (between 1 and 300 seconds) to indicate the number
of elapsed seconds causing the switch to time out on a request to
the primary or secondary server.