Installation guide

Network Setup
4-44
To configure an external Radius Server for EAP 802.1x, Hotspot or Dynamic MAC ACL WLAN support:
1. Select Network > Wireless LANs from the main menu tree.
2. Select an existing WLAN from those displayed within the Configuration tab.
3. Click the Edit button.
4. Select either the EAP 802.1x, Hotspot or Dynamic MAC ACL button from within the Authentication
field. This enables the Radius Conig... button at the bottom of the Network > Wireless LANs > Edit
screen.
5. Select the Radius Conig... button. The Radius Configuration screen displays (with the Radius tab
displayed by default) for defining an external Radius or NAC Server.
CAUTION If using an external Radius Server as the primary authentication source and no
secondary source is specified (either external or local), all users attempting to
access the switch managed network will be granted access if the primary
server becomes unreachable.
CAUTION To optimally use an external Radius Server with the switch, Motorola
recommends defining specific external Server attributes to best utilize user
privilege values for the switch. For information on defining the external Radius
Server configuration, see Configuring an External Radius Server for Optimal
Switch Support on page 4-47.
!
!