Installation guide

Network Setup
4-26
Manual Mapping of
WLANs
Use this option (its selected by default) for custom WLAN to Radio
mappings. When Advanced Configuration is disabled, the user
cannot conduct Radio – WLAN mapping. Additionally, the user
cannot enable WLANs with an index from 17 to 32. Once the
Advanced Configuration option is enabled, the following
conditions must be satisfied (to successfully disable it). No
WLANs with index 17 to 32 should be enabled. Additionally, the
Radio – WLAN mapping should conform to the following:
BSS ID 1 – Possible WLANs 1,5,9,13
BSS ID 2 – Possible WLANs 2,6,10,14
BSS ID 3 – Possible WLANs 3,7,11,15
BSS ID 4 – Possible WLANs 4, 8, 12,16.
Enable WLAN
Bandwidth Settings
Select this option to enable WLAN bandwidth settings. WLAN
bandwidth settings ensures quality of service for applications
regardless of network load. This option is selected by default.