User manual

Motorola RF Switch CLI Reference Guide
2-50
2.2.7 interfaces
 Common to all modes
Displays the status of the different switch interfaces
Syntax
show interfaces [WORD|ge|me1|sa|switchport|vlan]
Parameters
Usage Guidelines
Use the show interface command to display the administrative and operational status
of all the interfaces or a specified interface
Example
RFSwitch#show interfaces eth 1
Interface eth1
Hardware Type Ethernet, Interface Mode Layer 2, address is
00-a0-f8-65-ea-8e
index=2001, metric=1, mtu=1500, (HAL-IF)
<UP,BROADCAST,RUNNING,MULTICAST>
Speed: Admin Auto, Operational 10M, Maximum 1G
Duplex: Admin Auto, Operational Half
Switchport Settings: Mode: Access, Access Vlan: 2100
input packets 0, bytes 0, dropped 0, multicast packets 0
input errors 0, length 0, overrun 0, CRC 0, frame 0, fifo
0, missed 0
output packets 0, bytes 0, dropped 0
output errors 0, aborted 0, carrier 0, fifo 0, heartbeat
0, window 0
show interfaces
[WORD|ge|me1|sa|
switchport|vlan]
Displays the interface name
•WORD– Displays interface name
• ge – Displays Gigabit Ethernet interface information
• me1 – Displays fast ethernet information
•sa – Displays Static Aggregate information
• switchport – Displays native VLAN(s) and allowed VLAN
information on switch ports
• vlan[WORD|ge|me1| sa|vlan <1-4094> – Displays VLAN
interface details