User manual

Role Instance
26-19
26.1.15 show
 Role Config Commands
Displays current system information
Supported in the following platforms:
• RFS7000
• RFS6000
Syntax
show <paramater>
Parameters
Example
RFSwitch(config-role)#show ?
access-list Internet Protocol (IP) aclstats
Show ACL Statistics information
alarm-log Display all alarms currently in the
system
autoinstall autoinstall configuration
banner Display Message of the Day Login
banner
boot Display boot configuration.
clock Display system clock
commands Show command lists
crypto encryption module
debugging Debugging information outputs
dhcp DHCP Server Configuration
environment show environmental information
file Display filesystem information
SWITCH NOTE: The following commands display only for
RFS6000:
• power
The following commands display only for RFS7000: port-channel
• static-channel-group
? Displays parameters for which information can be
viewed using the show command