User manual

Role Instance
26-5
26.1.2 authentication-type
 Role Config Commands
Selects authentication type for the role
Supported in the following platforms:
• RFS6000
• RFS7000
Syntax
authentication-type [any|eq|neq]
authentication-type any
authentication-type eq [eap|hotspot|kerberos|mac-auth|none]
authentication-type neq[eap|hotspot|kerberos|mac-auth|none]
Parameters
Example
RFSwitch(config-role)#authentication-type any
RFSwitch(config-role)#
any Any type of authentication.
eq
[eap|hotspot|kerberos|
mac-auth|none]
Authentication type equals one of the following:
• eap – Extensible Authentication Protocol
• hotspot – Hotspot authentication
• kerberos – Kerberos authentication
• mac-auth – MAC authentication protocol
• none – no authentication used
neq
[eap|hotspot|kerberos|
mac-auth|none]
Authentication protocol does not contain one of the listed
options.