User manual

Motorola RF Switch CLI Reference Guide
25-38
radio Radio related commands
RFSwitch(config-wireless-smart-rf)#
RFSwitch(config-wireless-smart-rf)#show wireless smart-rf
configuration
Smart-RF Module : disabled
Smart-RF Calibration configuration:
auto-assign detector : enabled
auto-assign channel : disabled
auto-assign power : enabled
auto-assign rescuer : enabled
channels selected :
channels excluded :
assignable-power-range : [ 4 - 16 ] dBm
number of rescuers : 3
scan dwell time : 1 second
retry-threshold : 14.0 averaged retries/packet
hold-time : 3600 seconds
Smart-RF Calibration Schedule:
schedule calibration : disabled
schedule first-start : Sat Mar 29 03:30:00 2008
schedule interval : 1 day(s)
Smart-RF Run Time Monitor and Recovery configuration:
recover interference : enabled
recover neighbor : enabled
recover coverage-hole : enabled
Diagnostic configuration:
Verbose Mode : disabled
Extensive Scan Mode : disabled
RFSwitch(config-wireless-smart-rf)#
RFS7000(config-wireless-smart-rf)#show wireless smart-rf
calibration-status
Smart-RF Calibration is busy at delay-second
Smart Master IP: 0.0.0.0