User manual

Smart RF Instance
25-31
Parameters
show cli
Displays the CLI tree of the current mode.
smart-rf [clear-history |
load-from-file|
max-history|replay|
rescue|restore|
save-to-file|simulate|
step-calibrate]
Smart RF related commands are executed from this service
command.
• clear-history – Clears assignment history
• load-from-file – Loads Smart RF record from file
smart.bin
• max-history <0-65535> – Sets the number of assignment
items to be retained as history.
• replay enable – Enables the Smart RF replay mode
• rescue <WORD> – Enables force rescue operation
• restore <WORD> – Removes any recovering operation on
given radio
• save-to-file – Saves Smart RF records to the local file
smart.bin
• simulate [coverage-hole|interference] – Simulates the
different radio events
• coverage-hole <UINT_RANGE> – Simulates the
coverage-hole event
• UINT_RANGE [pattern-11a|pattern-11b
|pattern11bg|pattern-2-mbps] – provide simulated
MU’s allowed
• interference – Simulates radio interferences
• step-calibrate [assign-channels|assign-detectors|
assign-power|assign-prepare|assign-rescuers|
collect-data|prepare-detectors|pull-rf-config|
push-rf-config|sync-rf-config] – Manages Smart-RF
commands
• assign-channels – Assigns channels to radios
• assign-detectors – Assigns detectors
• assign-power – Assigns tx power to radios