User manual

Smart RF Instance
25-29
25.1.17 select-channels
 Smart RF Instance
Selects a list of channels for Automatic Channel Scan and Smart RF
Use this command to add channels or remove them from the channel list.
Supported in the following platforms:
• RFS7000
• RFS6000
Syntax
select-channel [<WORD>|add<WORD>|remove <WORD>]
Parameters
Example
RFSwitch(config-wireless-smart-rf)#select-channels 1,2,15-17
RFSwitch(config-wireless-smart-rf)#select-channels add
1,2,15-17
RFSwitch(config-wireless-smart-rf)#select-channels remove
1,2,15-17
RFSwitch(config-wireless-smart-rf)#
<WORD>
A comma separated list of channel numbers.
add <WORD>)
Add a channel or a list of channels to the channel list.
remove <WORD>
Remove a channel or a list of channels from the channel list