User manual

Motorola RF Switch CLI Reference Guide
25-4
25.1.2 auto-assign
 Smart RF Instance
Enables individual RF parameters to be auto-assigned
Supported in the following platforms:
• RFS7000
• RFS6000
Syntax
auto-assign [all|channel|detector|power|rescuer] enable
Parameters
Example
RFSSwitch(config-wireless-smart-rf)#auto-assign all enable
RFSSwitch(config-wireless-smart-rf)#auto-assign channel
enable
RFSSwitch(config-wireless-smart-rf)#auto-assign detector
enable
RFSSwitch(config-wireless-smart-rf)#auto-assign power enable
RFSSwitch(config-wireless-smart-rf)#auto-assign rescuer
enable
auto-assign
[all|channel|detector|power|
rescuer] enable
Enables individual RF parameters to be auto-assigned.
• all - Enables auto-assign for all the RF parameters
• channel enable - Enables auto-assign for channels
• detector enable - Enables auto-assign for detectors
• power enable - Enables auto-assign for power
• rescuer enable - Enables auto-assign for rescuer