User manual

RTLS Instance
21-27
21.1.17 zone
 RTLS Config Commands
Configures the zone. Maximum of 16 zones can be configured for a site.
Supported in the following platforms:
• RFS7000
• RFS6000
Syntax
zone <1-48> [name <name>|perimeter x <0-65535> y <<0-65535> ]
Parameters
Usage Guidelines
Use {no} zone <index> [options] to negate a zones configurations
Example
RFSwitch(config-rtls)#zone 1 name yard
RFSwitch(config-rtls)#
RFSwitch(config-rtls)#zone 1 perimeter x 0 y 0
RFSwitch(config-rtls)#
RFSwitch(config-rtls)#zone 1 perimeter x 40 y 0
RFSwitch(config-rtls)#
RFSwitch(config-rtls)#zone 1 perimeter x 40 y 100
<1-48>name
<name>|perimeter x
<0-65535> y <<0-65535>
]
Select a single zone index for configuration
• name <name> – Configures name of new zone
• perimeter [x y]– Configures zone perimeter coordinates
• x <0-65535> – Defines X coordinate
• y <0-65535> – Defines Y coordinate