User manual

Motorola RF Switch CLI Reference Guide
21-14
21.1.10 reference-tag
 RTLS Config Commands
Configures fixed RFID tag as reference tag and sets its coordinates within a specified
location
Supported in the following platforms:
• RFS7000
• RFS6000
Syntax
reference-tag rfid <tag-id> coordinates x <0-65535> y
<0-65535> {[z<0-65535>]}{orientation [0|90|180|270]}
{range <1-50>}
Parameters
Usage Guidelines
Use [no] reference-tag rfid <tag-id> (coordinates x <0-65535> y <0-
65535>) (orientation (0|90|180|270)) range <1-150>]
to rollback the
reference-tag configuration.
rfid <tag-id> coordinates x
<0-65535> y <0-65535> {[z
<0-65535>]} {orientation
[0|90|180|270]} {range <1-
50>}
Configures rfid tag as a reference tag
• coordinates – Configures tag location
• x <0-65535> – Configure X coordinate
• y <0-65535> – Configure Y coordinate
• z<0-65535> – Configure Y coordinate
• orientation – Configures reference tag orientation
(angles in degrees)
• 0 – Increments only X
• 90 – Decrements only X
• 180 – Decrements only Y
• 270 – Increments only Y
• range <1-50> – Configures tag read range in feet.