User manual

Wireless Instance
20-111
hotspot [allow-eap|
allow-list|cache-ageout|
ntf-logout-port|
redirect-to-hostname|
simultaneous-users|
query|webpage|
webpage-location)
Modifies hotspot related parameters
• allow-eap – allow EAP authentication in addition to web
based login.
• allow-list <1-32> <IP> – Specifies the allowed list that
user can access without prior authentication. Typically
this would be the external web-page's IP address.
• <1-32> – Allow-list Rule index value.
• <IP> – Allow-list IP address. This parameter refers to
a specific IP address to which unauthenticated
mobile-units can connect to. It does not specify a
network or a subnet.
• cache-ageout <5-86400> – The time duration in seconds
to ageout the cache after MU disassociation.
• ntf-logout-port <0-65535> – Configures the port to send
the NTF-Logout when the device is in external hotspot
mode.
• max-login-attempts <0-10> – Modifies hotspot
maximum login attempts.
• <0-10> – Login attempts between 0-10.
• query [<1-10>|<query-list>] – Specifies queries to be
appended to redirection URL.
• <1-10> – A single index.
• <query-list> – A list of indices.
• redirect-to-hostname – Use the Hostname/System-
Name in the redirection URL instead of the IP address of
the switch.
• simultaneous-users <0-8192> – Specifies how many
simultaneous MAC address can be allowed for a given
end user.
• <0-8192> – The number of MAC addresses that are
allowed to use that username at the same time. 0
implies disabling of the checks.