User manual

Motorola RF Switch CLI Reference Guide
2-30
• num-mu – The number of mobile devices associated
with this radio
• power – The configured and current transmit power
of the radio
• pref-id – The adoption preference id of the radio
• radio-desc – The description of the radio
• radio-id – The radio index in configuration
• state – The current operational state of the radio
• dot11i – modify dot11i service parameters
• dump-core – Creates a core file of the ccsrvr process
• enhanced-beacon-table [channel-set|enable|
erase-report|max-ap|scan-interval|scan-time]– Enhanced
beacon table for AP locationing.
• channel-set [a|an|b|bg|bgn] <1-200> – Adds channels
to the different radio types. Channel types are a, an, b,
bg, bgn. The channel number must be in the range 1 to
200.
• enable – Enables the Enhance Beacon Table feature for
AP locationing
• erase-report – Erases the reports for Enhanced Beacon
Table feature.
• max-ap <0-512> – Sets the maximum number of APs to
be recorded in the Enhanced Beacon Table. Set a value
in the range 0 -512.
• scan-interval <10-60>– The time duration between two
enhanced beacon table for AP locationing scans in
seconds.
• scan-time <100-1000>– The time duration of an
Enhanced Beacon Table scan in millisecond.s