User manual

Common Commands

2-29

• radio-desc – description of radio where the mobile-

unit is associated

• radio-id – The radio index to which the mobile-unit

is associated

• ssid – The ssid of the mobile-units wlan

• state – The current state of the mobile-unit

• username – The Radius username of the user

connected through this device (shown only if

applicable and available)

• vlan – The vlan-id assigned to the mobile-unit

• wlan-desc – The wlan description the mobile-unit is

using

• wlan-id – The wlan index the mobile-unit is using

• sh-wi-radio [adopt-info|ap-locn|ap-mac|

radio-desc|radio-id|state] – Customize the output of

the "show wireless radio" command

• adopt-info – The adoption information about the

radio

• ap-locn – The location of the AP to which this radio

belongs

• ap-mac – The MAC address of AP to which the radio

belongs

• ap-name – The name of the AP to which this radio

belongs

• bss – The bssid of the radio

• channel –The configured and current channel of the

radio

• dot11-type – The the dot11 type (11a/11g etc) of the

radio