User manual

Motorola RF Switch CLI Reference Guide
20-78
20.1.43 rate-limit
 Wireless Configuration Commands
Sets the default rate limit per user in kbps, and applies to all enabled WLANs
Supported in the following platforms:
• RFS7000
• RFS6000
Syntax
rate-limit [wired-to-wireless|wireless-to-wired] <0-100000>
Parameters
Usage Guidelines
Use {no} rate-limit [wired-to-wireless|wireless-to-wired] to remove
the rate limit applied to the group
Example
RFSwitch(config-wireless)#rate-limit wired-to-wireless 1000
RFSwitch(config-wireless)#
RFSwitch(config-wireless)#rate-limit wireless-to-wired 20000
RFSwitch(config-wireless)#
wired-to-wireless
<100-100000>
Down link direction from network to wireless client
• <100-100000> – rate in the range of <100-100000> kbps
wireless-to-wired
<100-100000>
Up link direction from wireless client to network
• <100-100000> – rate in the range of <100-100000> kbps