User manual

Common Commands

2-27

smart-rf [clear-

history|load-from-

file|replay|rescue|restore|

save-to-file|simulate]

Displays Smart-RF Management Commands

• clear-history– clears assignment history

• load-from-file – load record from file

• replay enable – set replay mode

• enable – enable replay mode

• rescue <MAC> – force rescue operation

• <MAC> – A single radio-mac-address, a single index

• restore <MAC> – remove any recovering operation on

given mode

• <MAC> – A single radio-mac-address a single index

• save-to-file – save records to file smart.bin

• simulate [coverage-hole|interference] – Simulate radio

events

• coverage-hole <1-4096> – Simulate coverage hole

• experienced-rate transmit-rate – Provide the

experienced rate in mbps

• transmit-rate [patter-11a|pattern-11b|

pattern-11bg|pattern-2-mbps] – Provide the

simulated MU’s allowed transmit rates in

hexadecimal format

• pattern-11a – 11a Unit

• pattern-11b – 11b Unit

• pattern-11bg – 11bg Unit

• pattern-2-mbps – 2 Mbps Unit

• interference <MAC> – Simulate interference on radio

• <MAC> – A single radio-mac-address, a single

index

start-shell Provides shell access

test Provides test parameters

undefine ecspec

Undefines non active Event Cycle Specification

• ecspec <SPECNAME> – Name of ECSpecs configuration