User manual

Wireless Instance
20-71
bss [<1-4>|add-wlans|
auto] <wlans>
Maps WLANs to radio BSSIDs
• <1-4>– Sets the BSS where WLANs are mapped
• add-wlans <wlans> – Adds new WLANs to existing
radios. The other WLANs on the radios are left as is.
• auto <wlans> – Sets the automatic assignment of a BSS.
The user selects WLANs, and the system assigns them to
a BSS automatically.
• <wlans> – Defines a list (1,3,7) or range (3-7) of WLAN
indices. When a BSS is also specified, the first WLAN is
used as the primary WLAN. When the auto option is
used, the system automatically assigns the first four
WLANs as primaries on their respective BSSIDs.
channel-power
[indoor|outdoor] [<1-
200>|acs|random]
Sets the location, channel and transmit power level
• indoor [<1-200>|acs|random]– Defines an indoor location
• <1-200> <4-20> {[lower|upper]} – Defines the channel
number
• <4-20> – Power in dBm
• lower – Lower channel width mode
• upper – Upper channel width mode
• outdoor [<1-200>|acs|random]– Defines an outdoor
location
• <1-200> – Sets the channel number
• <4-20> – Sets the power in dBm
• acs <4-20> {[20 MHz | 40 Mhz]} – Enables ACS (auto
channel selection). A radio will scan for the least
congested channel at startup or switch
reconfiguration.
• random <4-20> {[20 MHz | 40 Mhz]} – Random
channel selection