User manual

Motorola RF Switch CLI Reference Guide
20-70
antenna-mode
[diversity|mimo|primary|
secondary]
Defines the antenna diversity mode. Select from the
following options:
• diversity–Full diversity (both antennas)
•mimo – MIMO
• primary–Primary antenna only
• secondary–Secondary antenna only
Note: Before executing this command, ensure the radio is
present and is a AP300 model.
base-bridge [enable|
max-clients <1-12>]
Sets base bridge values
• enable – Allows the given radio to act as a base bridge
and accept connections from client bridges.
• max-clients <1-12> – Configures a base-bridge. Enter
maximum client bridges allowed.
beacon-interval
<50-200>
Sets the beacon interval (in K-uSec)
bridge-fwd-delay <4-30> Sets the STP bridge forward delay (in seconds)
• <4-30> - Time in seconds
bridge-hello <1-10> Sets the STP bridge hello (in seconds)
• <1-10> - Time in seconds
bridge-max-ageout
<4-3600>
Sets the STP bridge maximum ageout (in seconds)
• <4-3600> - Time in seconds
bridge-msg-age <6-40> Sets the STP bridge message age (in seconds)
• <6-40> - Time in seconds
bridge-priority
<0-65535>
Sets the STP bridge priority (in seconds)
• <0-65535> - Priority value