User manual

Motorola RF Switch CLI Reference Guide
20-48
ex-ops
[80211-replay-fails|all|
association-requests|
authentication-fails|
crypto-replay-fails|
decryption-fails|
disassociations|
eap-naks|eap-starts|
probe-requests|
unassoc-frames]
[filter-ageout <0-86400>|
threshold [mu|radio|
switch] <0-65535>]
Sets values related to the detection of excessive operations
on the RF network
• 80211-replay-fails – 802.11 replay check failure
•all – Changes for all types of excessive operations
• association-requests – 802.11 authentication and
association requests
• authentication-fails – Failure to authenticate with
servers (RADIUS/Kerberos)
• crypto-replay-fails – TKIP/CCMP IV replay check failure
• decryption-fails – Decryption failures
• disassociations – Disassociation and deauthentication
frames
• eap-naks – Excessive EAP-NAKs
• eap-starts – EAP (802.1x) start frames
• probe-requests – Probe request frames
• unassoc-frames – Frames from unassociated stations
For all the above options, the following values are set
• filter-ageout <0-86400> – Sets the number of seconds
mobile units will be filtered out
• threshold [mu|radio|switch] <0-65535> – Sets the
threshold allowed in the detection window
• mu – Uses the threshold for monitoring on a per
mobile unit basis
• radio – Uses the threshold for monitoring on a per
radio basis
• switch – Uses the threshold for monitoring at the
switch level