User manual

Motorola RF Switch CLI Reference Guide
20-44
20.1.28 hotspot
 Wireless Configuration Commands
Configures the WLAN hotspot configuration
This overrides or adds to the existing hotspot configuration on the WLAN.
Supported in the following platforms:
• RFS7000
• RFS6000
Syntax
hotspot query <query-index> <query-field> [mu-ip|ssid|
switch-ip|switch-name|user-string]
Parameters
Example
RFSwitch(config-wireless)# hotspot query 1 user-name user-
string
RFSwitch(config-wireless)# hotspot query 2 from mu-ip
RFSwitch(config-wireless)#
<query-index>
The index of this query in the query list. Can be in the range
of 1 and 10.
<query-field> [mu-ip|
ssid|switch-ip|
switch-name|user-string]
The name of the field in the URL whose value is substitute
with the parameters
• mu-ip – The MU’s IP address
• ssid – The WLAN’s SSID
• switch-ip – The switch’s router ip-address for the
external hotspot server
• switch-name – The switch’s name on the network
• user-string – Specifies that the value of the query is a
user string.