User manual

Motorola RF Switch CLI Reference Guide
20-38
20.1.22 dhcp-sniff-state
 Wireless Configuration Commands
Records mobile unit DHCP state information
Supported in the following platforms:
• RFS7000
• RFS6000
Syntax
dhcp-sniff-state enable
Parameters
Use the {no} dhcp-sniff-state enable command to disable recording mobile unit
DHCP state information.
Example
RFSwitch(config-wireless)#dhcp-sniff-state enable
RFSwitch(config-wireless)#
enable Allows support for recording DHCP state information for
mobile units