User manual

Wireless Instance
20-37
20.1.21 dhcp-one-portal-forward
 Wireless Configuration Commands
Enables the option to forward DHCP responses to one portal when the destination mobile-
unit is known from the response content
Supported in the following platforms:
• RFS7000
• RFS6000
Syntax
dhcp-one-portal-forward enable
Parameters
Usage Guidelines
Use the {no} dhcp-one-portal-forward enable command to disable forwarding
DHCP responses.
Syntax
RFSwitch(config-wireless)#dhcp-one-portal-forward enable
RFSwitch(config-wireless)#
enable
Enables the option to forward DHCP responses to one portal
when the destination mobile-unit is known from the
response content.