User manual

Wireless Instance
20-29
20.1.17 cluster-master-support
 Wireless Configuration Commands
Sets the parameters for cluster master support
This is required for cluster level functions.
Supported in the following platforms:
• RFS7000
• RFS6000
Syntax
cluster-master-support enable
Parameters
Usage Guidelines
Use the {no} cluster-master-support enable command to disable this feature.
By default, it is disabled.
Example
RFSwitch(config-wireless)#cluster-master-support enable
RFSwitch(config-wireless)#
enable
Enables the cluster master support. This is required for
cluster level functions.