User manual

Motorola RF Switch CLI Reference Guide
20-12
Usage Guidelines
Use {no} ap <LIST> secure-mode secret to reset a shared secret for a set of APs
(specified by LIST) to the default shared secret. It is saved in the running configuration file.
Use
{no} ap <list> secure-mode enable to disable secure-mode to a set of APs
(specified by LIST). The AP's MAC, and mode will be saved in the running configuration.
Use
{no} ap <list> secure-mode-staging enable to disable secure-mode staging to
a set of APs (specified by LIST). The AP's MAC, and staging mode will be saved in the
running configuration. In this mode, switch will not send at all configured shared secret in
the Join response to the AP and AP will not get adopted by the switch.
Example
RFSwitch(config-wireless)#ap 00-15-70-14-FE-C4 location 5th
Floor SalesUnit
RFSwitch(config-wireless)#ap 1 location SJ NewPark
RFSwitch(config-wireless)#
• secure-mode-staging enable – WISPe secure mode
staging
• enable – Configure secure-mode staging to a set of
APs (specified by LIST). The AP's MAC, and staging
mode will be saved in the running configuration.
In this mode, switch will send configured shared secret
in the clear in the Join response to the AP.
•Use the
{no} secure-mode-staging enable
command to negate.
<ap-index-list>
[adoption-policy|
country-code|location|
name|secure-code|
secure-mode-stagging]
A list (eg: 1,3,7) or range (eg: 3-7) of AP indices from the
show wireless ap command
<MAC-address>
[adoption-policy|
country-code|location|
name|secure-code|
secure-mode-stagging]
Lists an AP’s MAC address.