User manual

Wireless Instance
20-11
Parameters
<ap-index>
[adoption-policy|
country-code|location|
name|secure-code|
secure-mode-stagging]
Sets a single AP index. Use the show wireless ap
command to view the AP’s index value.
• adoption-policy [allow|deny]– Specifies adoption policy
• allow – Allow adoption
• deny – Deny adoption
• country-code <country-code> – Defines the country of
operation for the ap. Regulatory configurations such as
channels will be configured automatically.
• location <location> – Defines the location description of
the AP
• <location> – A string of upto 40 characters
• name <name>– Sets the name of this AP
• <name> – A string of upto 40 characters
• secure-mode [enable|secret] – WISPe secure mode.
Configures a shared secret to a set of APs (specified by
LIST). The AP's MAC, shared secret will be saved in the
running configuration file. If this command is not
executed for an AP, default pre-shared secret will be
assigned.
• enable – Configure secure-mode to a set of APs
(specified by LIST). The AP's MAC and mode will be
saved in the running configuration.
If secure-mode is enabled, the WISP-e for this AP is
secured
• secret [0 <secret>|2 <secret>|<secret>] – Secret is a
string of up to 64 characters
• 0 – Password is specified UNENCRYPTED
• 2 – Password is specified encrypted with
password-encryption secret
• <secret> – If the secret <secret> is not specified
then default secret will be used