User manual

Motorola RF Switch CLI Reference Guide
20-6
Usage Guidelines
Use {no} aap auto-upgrade enable to disable the auto-upgrade facility on the
switch
Example
RFSwitch(config-wireless)#aap config-apply mesh-delay 300
RFSwitch(config-wireless)#
config-apply
[def-delay|mesh-delay]
<30-10000>
Applies AAP configuration settings
• def-delay – Sets the default time to delay before
applying AAP configuration
• <30 -10000> – Set the delay time (in seconds)
• mesh-delay – Defines the interval to delay before
applying AAP configuration to Mesh APs
• <3--10000> – Set the delay time
(in seconds)
fwupdate
[<index-num>|<MAC>|
unadopted]
Manually upgrades the specified Advanced AP. The options
are:
• <index-num> – Updates the AAP based on its index
number
• <MAC> – Updates the AAP based on its MAC Address.
An AAP can be updated based on either a single MAC
address or a list of MAC addresses or a range of MAC
addresses. Use the show wireless ap command to
view the AP index
• unadopted – Updates the unadopted AAPs