User manual

Motorola RF Switch CLI Reference Guide
19-14
19.1.7.7 no
 group
Use this command to negate a command or set its defaults
Syntax
no [policy|rad-user|rate-limit]
no policy [day|time|vlan|wlan]
no policy wlan [<1-256>|all] <1-256>
no rate-limit [wired-to-wireless|wireless-to-wired]
Parameters
Example
RFSwitch(config-radsrv-group)#no policy day
RFSwitch(config-radsrv-group)#
RFSwitch(config-radsrv-group)#no policy time
policy [day|time|vlan|
wlan]
Defines the RADIUS group access policy configuration
• day – Resets the access policy (days of permitted access)
for this group
• time – Configures the group’s hourly access permissions
• vlan – Sets the VLAN ID for the group
• wlan [<1-256>|all] – Configures WLAN access policy for
this group
• <1-256> – Sets the WLAN range for the access policy
•all – Removes all the WLAN allowed
rad-user [<name>|all] Removes a user from this group
• <name> – Defines an existing user name in this group
• all – Removes all users from this group
rate-limit
[wired-to-wireless|
wireless-to-wired]
Negate a command or set its defaults
• wired-to-wireless –uplink direction - from wireless client
to network
• wireless-to-wired – down-link-direction - from network
to wireless client