User manual

Radius Server Instance
19-3
19.1.1 authentication
 Radius Configuration Commands
Configures the authentication scheme used with the RADIUS server
Supported in the following platforms:
• RFS7000
• RFS6000
Syntax
authentication [data-source|eap-auth-type]
authentication data-source [ldap|local]
authentication eap-auth-type [all|peap-gtc|
peap-mschapv2|tls|ttls-md5|ttls-mschapv2|ttls-pap]
Parameters
authentication
data-source [ldap|local]
Configures authentication
• data-source [ldap|local] – Sets the RADIUS data source
for user authentication
• ldap - Remote LDAP Server
• local - Local user database
eap-auth-type
[all|
peap-gtc|
peap-mschapv2|tls|
ttls-md5|ttls-mschapv2
ttls-pap]
Defines RADIUS EAP and default authentication
configurations
• all – Enables TTLS and PEAP settings
• peap-gtc – Defines the EAP and PEAP settings used with
the default authentication configuration
• peap-mschapv2 – Sets the EAP/PEAP type used with
mschapv2
• tls – Defines an EAP/TLS configuration scheme
• ttls-md5 – Sets the EAP/TTLS configuration used with
the default md5 authentication scheme
• ttls-mschapv2 – Sets the EAP/TTLS configuration used
with the default mschapv2 authentication scheme
• ttls-pap – Sets the EAP/TTLS configuration used with the
default pap authentication scheme