User manual

DHCP Class Instance
Use the (config-dhcpclass) instance to configure DHCP user classes. The switch supports
a maximum of 8 user classes per DHCP class. To navigate to this instance use the
command:
RFSwitch(config)#ip dhcp class <class-name>
RFSwitch(config-dhcpclass)#
Refer to ip on page 12-10 and DHCP Class Instance on page 18-1 for other DHCP related
configurations.
18.1 DHCP Server Class Config Commands
Table 18.1 summarizes config-std-nacl commands:
Table 18.1 DHCP Server Class Config Commands
Command Description Ref.
clrscr Clears the display screen page 18-3
end Ends the current mode and moves to the EXEC mode page 18-4
exit Ends the current mode and moves to the previous
mode
page 18-5
help Displays the interactive help system in HTML format page 18-6
multiple-user-
class
Enables multiple user class options page 18-7