User manual

Standard ACL Instance
15-11
15.1.7 no
 Standard ACL Config Commands
Negates a command or sets its defaults
Supported in the following platforms:
• RFS7000
• RFS6000
Syntax
no [deny|mark|permit]
Negates all the syntax combinations used in deny, mark and permit designations.
Parameters
Example
RFSwitch(config-std-nacl)#no permit any rule-precedence 10
RFSwitch(config-std-nacl)#
RFSwitch(config-std-nacl)#no deny any rule-precedence 20
RFSwitch(config-std-nacl)#
RFSwitch(config-std-nacl)#no mark tos 4 192.168.2.0/24 rule-
precedence 30
RFSwitch(config-std-nacl)#
deny Specifies packets to reject
mark Specifies packets to mark
permit Specifies packets to forward