User manual

Spanning tree-mst Instance
13-9
13.1.7 no
 mst Config Commands
Negates a command or sets its defaults
Supported in the following platforms:
• RFS7000
• RFS6000
Syntax
no [instance|name|revision]
Parameters
Usage Guidelines
The no command negates any command associated with it. Wherever required, use the
same parameters associated with the command getting negated.
Example
RFSwitch(config-mst)#no instance 10 vlan 20
RFSwitch(config-mst)#
RFSwitch(config-mst)#no name MyRegion
RFSwitch(config-mst)#
RFSwitch(config-mst)#no revision
RFSwitch(config-mst)#
instance Sets the MST Instance
•vlan – Delete the association of vlan with this instance
• <vlan-id> – List of vlan IDs
name Assigns a name to the MST region
revision Defines the revision number for configuration information