User manual

Interface Instance
12-13
12.1.9 mac
 Interface Config Commands
Applies a MAC access list (ACL) to Gigabit Ethernet interface
Supported in the following platforms:
• RFS7000
• RFS6000
Syntax
mac access-group <acl-name> in
Parameters
Example
RFSwitch(config-if)#mac access-group Ark200 in
RFSwitch(config-if)#
NOTE: The access list cannot be applied on a management interface
(me1).
access-group <acl-name> Sets the MAC access groups ACL
• <acl-name> – Sets ACL name
• in – Applies the ACL to ingress packets