User manual

Motorola RF Switch CLI Reference Guide

12-10

12.1.8 ip



Interface Config Commands

Sets the IP address for the assigned Gigabit Ethernet interface (GE), Fast Ethernet

interface (ME), LAN interface (UP), Ethernet interface (ETH), Static Aggregate interface

(SA) or VLAN Interface

Supported in the following platforms:

• RFS7000

• RFS6000

Syntax

ip access-group [<1-99>|<100-199>|<1300-1999>|

<2000-2699>|WORD in]

ip arp [rate-limit|trust]

ip dhcp trust

ip address [<IP/Mask> {secondary}|dhcp]

ip helper-address <IP> [<interface>|ge <1-4>|me1|

sa <1-4>|vlan <1-4094>]

ip nat [inside|outside]

Parameters

access-group

[<1-99>|

<100-199>|

<1300-1999>|

<2000-2699>]

Defines the access group

• <1-99> – Sets the IP standard access list

• <100-199> – Sets the IP extended access list

• <1300-1999> – Sets the IP standard access list

(expanded range)

• <2000-2699> – Sets the IP extended access list

(expanded range)

• WORD in – Defines the access list name

• in – Sets incoming packets