User manual

Motorola RF Switch CLI Reference Guide
8-10
8.1.8 show
 Crypto Peer Config Commands
Displays current system information running on the switch
Supported in the following platforms:
• RFS7000
• RFS6000
Syntax
show <paramater>
Parameters
Example
RFSwitch(config-crypto-peer)#show ?
access-list Internet Protocol (IP)
aclstats Show ACL Statistics information
alarm-log Display all alarms currently in the
system
autoinstall autoinstall configuration
banner Display Message of the Day Login
banner
boot Display boot configuration.
SWITCH NOTE: The following commands display only for
RFS6000:
• power
The following commands display only for RFS7000 :
• port-channel
• static-channel-group
NOTE: For more details on the show command see show on page 2-37
? Displays all the parameters for which information can be
viewed using the show command.