User manual

Global Configuration Commands
5-125
clamp [path-mtu|
tcp-mss]
Configures wireless firewall
• clamp [path-mtu|tcp-mss] – Displays clamp value
• path-mtu – Displays limit discovered path-mtu
• tcp-mss – Displays limit TCP to inner path-mtu.
flow timeout
[icmp|other|tcp|udp]
Configures firewall flow of packets.
• timeout [icmp|other|udp] <1-32400> – Sets the timeout
value for type ICMP, UDP, and Other to a value between
1 and 32400 seconds.
• timeout tcp [close-wait|established|reset|setup]
<10-32400> – Sets the timeout value for TCP packet
types to a value between 1 and 32400 seconds.
• close-wait – Configures the Closed TCP Flow timeout
value
• established – Configures the Established TCP Flow
timeout value
• reset – Configures the Reset TCP Flow timeout value
• setup – Configures the Opening TCP Flow timeout
value
virtual-defrag [enable|
max-defrag-per-host|
max-frags-per-dgram|
min-1st-frag-length]
Configures IPv4 virtual defragmentation.
• enable – enables IPv4 virtual defragmentation. Motorola
recommends that this option be enabled.
• max-defrag-per-host <1-32> – Sets the maximum active
defragmentation per host to a value between 1 and 32.
• max-frags-per-dgram <2-8129> – Sets the maximum
allowed fragmentation per datagram to a value between
2 and 8129.
• min-1st-frag-len < <8-1500> – Sets the minimum
fragmentation length for the 1st fragment to a value
between 8 and 1500