User manual

Global Configuration Commands
5-93
Example
RFSwitch(config)#smtp-notification enable
RFSwitch(config)#smtp-notification enable traps dhcp-server
dhcpServerDown
RFSwitch(config)#snmp-notification recipient 1
[e-mail]
• wlan [vlanUserLimitReached|webPortalUnavailable|
webPortalUnconnected||webPortalUnreachable] –
Enables wireless wlan traps when:
• vlanUserLimitReached – WLAN-VLAN user limit is
reached.
• webPortalUnavailable – Web portal unavailable.
• webPortalUnconnected – Web portal disconnected.
• webPortalUnreachable – Web portal unreachable.
password 0 <password> SMTP Authentication Password.
• 0 – Password is specified unencrypted.
• <password> – Enter password up to 64 characters in
length.
port <1-65535> Enter SMTP Server TCP Port.
prefix <smtp-prefix> Enter SMTP subject prefix up to 16 characters in length.
recipient <1-4>
<recipient-address>
Enter SMTP recipient index and SMTP recipient address up
to 128 characters in length.
sender <sender-address> Enter SMTP sender address up to 128 characters in length.
smtp-server-address <IP> Host to receive SMTP notifications. Enter IP address/
Hostname of SNMP server up to 128 characters in length.
user <username> SMTP Authentication User. Enter username up to 64
characters in length.