User manual

Motorola RF Switch CLI Reference Guide
5-78
Parameters
auto-revert enable Enables auto-revert.
auto-revert-period
<1-1800>
Sets the redundancy auto-revert delay interval in
minutes. The default is 5 minutes.
critical-resource-ip
<ip_address>
Sets critical resource IP address.
• <ip_address> – IP address of the critical resource.
dhcp-server enable Enables the DHCP redundancy protocol.
discovery-period <10-60> Sets the redundancy discovery interval in seconds. The
default is 30 seconds.
dynamic-ap-load-balance
[enable|
per-ap-mu-threshold|
schedule-interval|
schedule-start-time|
trigger]
Configures the different Dynamic AP Load Balance
feature. The following are the configured options:
• enable – Enables Dynamic AP Load Balance.
• per-ap-mu-threshold <1-512> – Sets the threshold per-
ap mu value to trigger Dynamic AP Load Balance. Set
a value between 1 & 512.
• schedule-interval <1-336> – Sets the time interval
days to trigger Dynamic AP Load Balance.
• schedule-start-time HH:MM <1-31> <1-12> <2008-
2035> – Sets the scheduled start time for Dynamic AP
Load Balance.
• trigger [runtime|schedule] – Sets the trigger for
running Dynamic AP Load Balancing. Can be either
runtime or schedule.
enable Enables the redundancy protocol.
group-id <1-65535> Sets the cluster ID (default cluster ID is 1).
handle-stp enable Delays the redundancy protocol state machine exec,
considering STP.
heartbeat-period <1-255> Sets the redundancy heartbeat interval.
hold-period <10-255> Sets the redundancy hold interval.