User manual

Global Configuration Commands
5-71
Example
RFSwitch(config)#ntp peer ?
WORD Name/IP address of peer
RFSwitch(config)#ntp peer TestPeer ?
autokey Configure autokey peer authentication scheme
key Configure peer authentication key
prefer Prefer this peer when possible
version Configure NTP version
<cr>
• prefer {version <1-4>} – Sets the preference for autokey.
Optionally set the NTP version to use.
• version <1-4> {prefer} – Sets the NTP version to use.
Optionally set this peer as preferred peer.
server Configures the NTP server.
• <peer-name-or-IP> – Sets the IP address or name of the
peer.
• autokey {[prefer {version <1-4>}|version <1-4> {prefer}]}
– Configures an autokey peer authentication scheme
• prefer – Optional. Prefers this peer when possible.
• version <1-4> – Configures the NTP version.
• key <1-65534> {[prefer {version <1-4>}|version <1-4>
{prefer}]} – Configures the autokey peer authentication
key.
• key <1-65535> – Sets the peer authentication key
number.
• prefer {version <1-4>} – Sets the preference for autokey.
Optionally set the NTP version to use.
• version <1-4> {prefer} – Sets the NTP version. Optionally
set this peer as preferred peer.
trusted-key <1-65534> Key numbers for trusted time sources.
• <1-65534> – Defines the Key number.