User manual

Global Configuration Commands
5-63
Example
RFSwitch(config)#logging on
RFSwitch(config)#logging aggregation-time 20
RFSwitch(config)#logging buffered critical
RFSwitch(config)#logging console critical
RFSwitch(config)#logging facility local6
RFSwitch(config)#logging monitor emergencies
RFSwitch(config)#logging syslog notifications
RFSwitch(config)#show logging
Logging module: enabled
Aggregation time: disabled
Console logging: level critical
Monitor logging: level emergencies
Buffered logging: level critical
Syslog logging: level notifications
Facility: local6
Log Buffer (198 bytes):
Mar 10 15:52:00 2009: %NSM-4-IFUP: Interface vlan2 is up
Mar 10 15:52:00 2009: %NSM-4-IFUP: Interface vlan10 is up
RFSwitch(config)#
monitor [<0-7>|alerts|
critical|debugging|
emergencies|errors|
informational|
notifications|warnings]
Sets the terminal lines logging level.
on Enables the logging of system messages.
syslog [<0-7>|alerts|
critical|debugging|
emergencies|errors|
informational|
notifications|warnings]
Sets the syslog servers logging level.