User manual

User Exec Commands
3-3
3.1.1 clear
 User Exec Commands
Resets the previous (last saved) command
Supported in the following platforms:
• RFS7000
• RFS6000
Syntax
clear [crypto|mobility|spanning-tree]
clear crypto [ipsec|isakmp] sa {<IP>}
clear mobility [event-log|mobile-unit|peer-statistics]
clear mobility event-log [mobile-unit|peer]
clear mobility mobile-unit [<MAC>|all|foreign-database|
home-database]
clear mobility peer-statistics {<Peer-IP>}
clear spanning-tree detected-protocols {interface
<interface-name>}
Parameters
NOTE: Refer to the interface details below when using clear counter
interface.
• ge <1-4> – Available only in RFS7000
• ge <1-8> – Available only in RFS6000
• me1 – Available in both RFS7000 and RFS6000
• up1 – Available only in RFS6000
• sa <1-4> – Available only in RFS7000
crypto [ipsec|isakmp] sa
{<IP>}
Clears IPSec/ISAKMP SAs for a given peer
•ipsec sa {<IP> } – Clears IPSec SA’s
• isakmp sa {<IP> } – Clears ISAKMP SA’s
• sa – Clears all IPSec/ISAKMP SA's
• <IP> – Optional. Peer IP address